Main Feature:
lapping/polishing machine
The machine is suitable for double-sided precision lapping and polishing of silicon piece,crystal quartz,optical glass,sapphire piece,ceramic piece,glass and other hard and fragile materials.
1,Frequency converter cooperates with frequency motor realize soft start,soft stop,stable speed and little impact.
2,Two or three motors drive the machine,Because of the wide speed range of center gear,speed ratio can be regulated immediately while working.For this reason,this machine is suitable for different lapping craft upper and lower lapping plate drive by main motor ,it is more reliable.
3,Center gear and inner gear ring lift at the same time,This synchronism meets requirement of loading.unloding and adjusting mesh position of carriers.
4,PLC control
5,The precision sensor cooperates with pneumatic control system that insure the pressure accuracy
6,PT can show the working parameter,while requlating different kings of craft parameter by its touch switches.Main operation realized by crdinary switches
Technical Data
|
Name |
SYXM20B-5L Lapping Machine |
SYXM20B-5P Polishing Machine |
|
1: Main Motor |
18.5kw |
22kw |
|
2: Sun Gear Motor |
3kw |
3kw |
|
3: Internal Gear Motor |
5.5kw |
5.5kw |
|
4: Internal&Sun Gear up/down |
0.75kw |
0.75kw |
|
5: Source Power |
380V 50HZ 3 |
380V 50HZ 3 |
|
6: Control Voltage |
110V or 220V |
110V |
|
7: Variable Speed Control |
0-60RPM Does not have the section adjustment |
0-60RPM Does not have the section adjustment |
|
8: Plate |
OD 1355mm¡ÁID475mm¡Á50tmm |
OD 1395mm¡ÁID435mm¡Á50tmm |
|
9: Carries quatity |
M3 Z=170 PCD510 |
M3 Z=170 PCD510 |
|
10: Carries |
5 PCS/Set |
5 PCS/Set |
|
11: Machine size |
1850L¡¤2300W¡¤2950H |
1850L¡¤2300W¡¤2950H |
|
12: Machine size |
Approximately8500kg |
Approximately8500kg |